The Eye of the Tiger

 Summer is gradually coming to a close and the sun is appearing farther south on the horizon every morning. The mornings aren't yet cold enough to turn on heat but we're getting there.

The good old Lot-O-Tumbler is doing its last load for the year and once I have worked a few stones for "She Who MUST Be Obeyed" I'll start cleaning the machines and the Lap of Lapidary will be shut down except for the drill press that I'll continue to use for metalwork through the winter.

Last year I participated in a little product research for Hi-Tech Diamond, a great American lapidary equipment company and as thanks, they gifted me with a beautiful thick slab of Tiger's Eye. This material appears to be the type formed by altered asbestos or chrysotile so I call it the ugly duckling. It starts life as an ugly, potentially dangerous mineral and, after it has been altered by silicate fluids, it becomes an amazingly beautiful gem rock that exhibits "chatoyance" or a shimmer of light that causes the stone to look different as it moves. It's an amazing, complex process that I won't go into here but the results it produces are visually stunning.

When I got the slab, I immediately knew what I wanted to do with it. It was large enough for me to get 3 pendants and thick enough for me to do a complete drop- that is curved surface front and back. I needed 3 pendants of differing size- the largest for Vickie my wife (she with the agate eye), a medium sized one for my older daughter Lisa and a smaller one for daughter Sandra- the runt of the litter.

First step was to define the shapes using a magic marker and doing a rough cut of the slab. I used my 10 inch Hi-Tech saw because the slab was so thick. Then I ground out the outside shapes on my new (and much loved!) Cab King cabbing machine.

Next, while the stones still had flat surfaces front and back, I located the mid point and cut a groove around the perimeter as shown in this stone, using a machine with a 1 mm. bit that lets me cut horizontal grooves.

The groove holds the wire I use to set the stone and doing it with a flat surface lets you make a nice straight cut. I like using this technique because it doesn't interfere with the colour or patterning of the stone.

Then it was back to the Cab King to grind the curved shapes on both sides, smooth them out and then polish with a mixture of tin and cerium oxide. I love the results!

I used bronze wire to complement the golden yellow of the stones and now the girls just have to decide what they want me to hang them on. Here's a video showing the effect of chatoyance but in all honesty, it is much more pronounced in person.

I hope you enjoy this and now it's on to new adventures. We have almost completed work on our new web site and enterprise- the Seawall Emporium- and I am now figuring out how I can incorporate old guitar strings in my creations so stay tuned (get it?)  and stay sane and healthy!

Cutting Perimeter Grooves in Petrified Wood Cabochons

I am now well into my petrified wood project. Just to recap, I started with several beautiful slabs of petrified wood and used a magic marker to define shapes.

I then cut them out and finished them on my new Cab King. The results were pretty spectacular.

Recently I was contacted by someone who wanted to buy these three.

So today, they had to have grooves cut around the perimeter to prepare for wire wrapping. I prefer this technique when stones have a lot of patterning or colour shifts so the wrapping doesn't "compete". I have included this video to show the process. Hope you enjoy it.

In my next post, I'll include a video on my process for wrapping with a groove cut.

Enjoy!

Latest Pieces from The Lap of Lapidary

Well, it certainly has been a "different" summer- in many ways.

First, there has been the weather- definitely not the year for "fun in the sun" as we have had very few nice days to date.

And then there's "the Virus".

Although there are tourists from other parts of our "Atlantic Bubble" in town, we decided not to open the gift shop because of its small size and will look to establish a significant web presence in the fall. That has meant that it is really quiet around here and while we miss meeting all the interesting people who stop by, it has given us more time to "create". Vickie has been doing some very interesting artwork which is nearing completion and when finished, I'll do a post on it.

It's been fun playing with my new toy- the 8 inch Cab King and a new old (50+ years) toy- my 10 inch Mercury oil saw that daughter Sandra updated with a new and more powerful motor.

I am in the midst of a massive project to create pendants, ear rings and rings from the beautiful petrified wood slabs gifted to me by Glenn Cooke (miss you guys!) but have taken some time to finish a few pieces of local stone that are now ready for wrapping.

The first one is a perfect Digby Neck pendant.

It is shaped just like The Neck- right down to Brier Island- with little druzy pockets in each segment and is made up of the basic rock that makes up The neck- basalt and agate.

The next piece comes from Brier Island- a beautiful piece of dark green brecciated (broken) jasper

I plan on cutting a groove around the edge and wrapping it with silver wire. Should be dynamite!

And then there are these two little gems. They come from a small stone found on a nearby beach that offered a really nice surprise when cut. The smaller is about an inch long.

The colour and detail on the patterning is awesome and deserving of a nice setting.

All for now. Hope to see you soon. Cheers!

What We've Been Up To

So how are we all bearing up in these "unique" times? It is so strange not having tourists visiting the shop but we are still keeping busy.

The new Cab King has proven to be amazing and we are producing some really outstanding finished product.

I have run into a bit of a problem though in that the "real artist" has decided she likes working on it as well and has even demanded her own apron!

Fortunately, she got bored and returned to her own side of the wall where she has been busy making gelli prints. I have no idea of the process other than the fact that I can no longer remove any of the various weeds around the house. The results are pretty cool I must admit. Here are a couple that are about 12x16 inches.

I find the detail amazing and, frankly struck by how beautiful an image a weed can make. Almost makes up for the fact I live my life in a grade 7 science project!

Next week I will shift my attention to some cutting on the 10 inch saw and making some polished specimens on my Hi-Tech slant lap so stay tuned!

A Tour of the Lap of Lapidary

Well, I have finally managed to get all the machines up and running and have decided that the shop name had to be changed. Since it now has everything I need- including a sound system- I thought it should be called "The Lap of Lapidary"!

New Sound System

To create the sound system, I had to get a signal booster so as to access the internet and now I can listen to music all day!

In order to show you everything in the shop, we created four videos and to make it realistic, I did them from the standpoint of taking a piece from a rough hunk of rock to a finished piece.

The first video takes you through the sawing of a large rock to produce a slab or slice.

Then we take the slice through the process to a finished, polished piece.

And then we take a look at a few special machines used to create specific effects in the finishing process.

And finally, I show you how I keep track of all the rock I have cut for future reference and possible use.

I hope that you have enjoyed the tour and if you have any questions about the process or a specific machine, feel free to ask. At some point I will be doing specific posts on individual machines to show them in action.

And if we ever get out from under this virus shadow, come and take the tour in person!