Summer Project Complete

 Every spring I set out with a goal to finish enough rough rock to allow me to replace the cabochons and guitar picks I have sold through the summer in the shop and on line and this year I set out with high expectations because I had beautiful agate and jasper to work with.

I set my Cab King up so that I can use the coarse wheels on the left and also access the trim saw to cut shapes etc..

This actually makes the first stage of rough shaping go much faster. The plan is to take all pieces (this year about 60) through this phase and then remove the trim saw attachment (great saw by the way) and put back the three finishing wheels and polishing pad. And the plan was going perfectly until my sciatic nerve started to really act up and I couldn't stand up long enough to use the machine. So here I was with 60+ unfinished cabs and cold weather approaching. I needed a plan "B".

My wife Vickie (A.K.A. The Real Artist) knows how to use our Lot-O-Tumbler so we decided to finish them with it. The first problem was coming up with a big enough load and we did that by adding smaller, round, polished silicate stones. We sort of picked up where the wheels had left off by going with 600 grit and using more than usual to take into account the larger surface area of the smaller rocks. Normally I go one day on this grit but this time we went two. Vickie then moved on to 1000 grit silicone carbide pre polish and then to tin oxide polish. In both steps we added more grit and went two days. Finally, she did a burnishing cycle with Ivory Soap and again, we used more than normal.

The results were more than acceptable and there was virtually no breakage or damage. Here's how the total load looked.

And here's how it looked when all the round and small stones had been removed.

Now that I look at it, there were probably more than 60 pieces. But I ended up with some great cabochons,

and awesome guitar picks!

Would I go this route again in the future? Probably not simply because I love the process and I think the Cab King finishing wheels do a slightly better job. Also, you can't finish pieces that have crystal druzy pockets this way. But this process had it's advantages. First, it was faster and second it saved the wear on the finishing wheels but most importantly it gave us a way to finish the job with me out of commission!

New Pieces For The Shop

We have been very busy of late and while it's nice to see your work being appreciated and leaving with a happy customer, it means I have to get back to work.

Right now I'm working on cabochons I made, creating upcycled copper bails in a manner so they can be interchanged to suit the customer. I have an amazing stock of Mexican Crazy Lace Jasper and here are a few finished pieces.

 

As you can see, the colour and patterning on these is absolutely stunning! And these stones are rare since it is now difficult to obtain new material.

But we have beautiful local rock as well. We have a rock called Stilbite that can be very colourful and exhibit amazing patterning. Here's a great example:

And of course we have amazing agate and jasper.

These can be purchased in our shop or online. Hope to see you soon!

The Rock Cutting Has Begun!

 Summer is here!

And it's finally warm enough for me to work in the shop with water. So the saw is humming and we've had some pretty awesome cuts so far. Here's a stone with a lot of copper oxide on the surface.

 And sure enough, the inside didn't disappoint.

You can even see a spot of native copper just to the left of the thumbnail. We also cut some very nice vein agate.

And some awesome plume /moss agate.

I just love the patterning and colour on this one so there is a really nice cabochon in its future.

Stay tuned with more cuts to come. And if you are in the neighbourhood, stop by and say hi and pick up your free tumbled rock. Take home a piece of "The Neck".

The Process

 I am not a jeweler per se. I am a lapidary. To me the most important element in any piece is the stone so settings are created to best show the stone and keep it safe. In this particular case, I was working with a stone exhibiting amazing patterning so the challenge was to create a setting that didn't cover it up. Step #1 was the design.

I positioned the stone on the paper and located the three shallow tabs where they would be clear of the best patterning and yet keep the stone secure in all directions. I cut the paper (roughly) and repositioned the stone using 2 sided tape. Then I folded the tab extensions up and drew the tab shapes and lengths. I used the square outline to cut a piece from my upcycled copper sheet and then cut the copper plate to fit the design. Then it was a matter of doing a LOT of filing until the plate matched the paper outline. At that point, I switched to sandpaper (400 grit -12,000 grit) to create burnished areas and other areas where I left the patina and character intact. Using a metal punch, a hole was made in the top extension to accommodate  the jump ring. At that point I carefully bent the 3 prongs until the stone was firmly held everywhere.

This agate is really amazing and I thought it deserved a special sliding bail. So I created this one and even added a little copper bead to "cinch" the neck.

The real problem was getting the colouring right on the picture. I can assure you it is much more dramatic in person (a photographer is another thing I am not!). Next step was to choose a complimentary premium leather cord and choose the length. I settled on a dark red to pick up the red in the stone and a length of 52 cm. (20 inches). The stone was hung on the leather and I finished it with a hand made decorative neck clasp.

I think the final piece is a real show stopper! Available on line or in the store and remember, I sell cabochons so if you would like to work with some beautiful rock, just let me know.

See you soon.

By the way, I have just passed 130K (non bot) page views on this blog and I would like to thank all of you for being part of my adventure.

Busy Times

 Things have been pretty hectic recently at The Artists' Mark.

 The Yarn sale on our hand dyed yarn ($15/ skein) is in full swing and while over 100 have been sold, we still have plenty left!

I must say that apart from being obsessed fanatics (you know who you are, heh,heh), knitters are some of the nicest people who come into the shop. And apparently they don't just like yarn. Recently I was concentrating on making new inventory but it hasn't gone all that well since uncaring thoughtless people keep buying it, forcing me to make even more. 

here's what I mean.

All sold!

I still have a few new beauts, however.

I'll be in the studio making more this week so if you're looking for a fantastic deal on hand dyed yarn, knit goods or rock jewelry, come on by.

Just a note: we'll be closed Wednesday afternoon because of an appointment.

Winter Comes To The Neck

 Well, our first big snow storm has finally arrived and it's a doozy. Fortunately (for us) we are getting the least amount of snow in the province but at the other end (Cape Breton) they have drifts 10 feet high and the Halifax area has received over 2 feet! It is "Snowmageddon"!

Here's how things are looking in Cape Breton. (not my pic)

Needless to say there will be no beachcombing today. Fortunately, I have a ton of cabochons to work with.

Now the job is to choose about a dozen to make pieces for the shop. We will probably open sometime in early April and by then the store will be fully stocked.

Here's one of my favourites.

 

We are so fortunate to have such beautiful local gemstone quality agate, jasper, carnelian- you name it we've got it! Digby Neck is such a magical place.

Hope to see you next summer!

 

One Door Shuts...And Another Opens

 Well, the scenery sure has changed. I now look out on several inches of snow with more to come today. Lapidary work requires a lot of water and right now that water is cold- VERY cold.

So now the scene shifts to fabrication and that takes place on my bench in my alloted space in "the real artist's" studio.

I have a problem that would be the envy of most- too much beautiful material! The real artist (AKA She with the agate eye) keeps finding me beautiful agates, jasper, amethyst, carnelian- you name it. I literally have enough good material to keep me going for decades but at 77 years old (and I mean OLD) I don't see decades in my future. So the first task has been to pare down the "stash" to a manageable amount.

As you can see this hasn't been an easy job. The small oval container just to the left of the blue bin contains well over 100 possible cabs to set. I'll probably get that down to about 20 that I'll start working on soon.

So if you ever want to buy some beautiful cabochons to make your own pieces, let me know.

Lots of Tourists

 As the weather finally improves and the smoke clears, more tourists are starting to appear and we've also seen people who come annually as they have summer homes here. I'm being kept busy making new pieces to replace sold items. Here's a real beauty combining a beautiful stone, unique hand fashioned copper setting and a show stopping Viking Knit Chain.

I have to say this is one of the most beautiful stones we have found on the neck. It positively glows!

Once again I have embarked on an ambitious project- finish 100 cabochons through the summer. Honestly, if I didn't have my Cab King with the trim saw attachment, I couldn't do it.

Believe it or not, one of the big problems I have is to be selective. Vickie has found me so much beautiful local rock! Here's a sampling.

This gorgeous piece has spectacular colour and patterning and will make a stunning pendant.

Another amazing piece with several different types of structure. It is photographed wet- hence the highlights.

This stunner has areas of moss agate on the bottom and a great pocket of fortification agate along with rich colour shifts. 

And last but by no means least, we have this show stopping combination of plume agate in an amethyst matrix. And these are just a few of this summer's haul. So if your travels take you to Nova Scotia. Make sure to come to the most interesting part- Digby Neck- and stop by to say hello and see the shop.

Cheers.

What Happens To The Rocks I Cut?

 My last post showed some of the local rocks I recently cut. But what happens next?

To a great degree, that depends on what I discover inside. If the rock has cracks, it will probably shatter when I grind it but if it has interesting features, I can sometimes make beautiful specimen pieces. If the rock is solid and interesting, I will use it to make cabochons. This requires me to rough cut the shape I want on my Hi-Tech saw and then grind and polish it on my Cab King.

Several of the pieces shown last time were good enough to become cabochons and I thought you might like to see the transformation.

This piece of petrified wood became ...                                                            this.

And this became ...                                                                                   this.              

This one was so spectacular I had to make several pieces:

Fantastic end result. Couldn't pick a best side for the teardrop so I finished both!

It is an absolutely amazing experience watching the transformation from a piece of rough rock to a finished piece. So if your travels take you to Digby Neck, stop by and see my shop.