Summer Project Complete

 Every spring I set out with a goal to finish enough rough rock to allow me to replace the cabochons and guitar picks I have sold through the summer in the shop and on line and this year I set out with high expectations because I had beautiful agate and jasper to work with.

I set my Cab King up so that I can use the coarse wheels on the left and also access the trim saw to cut shapes etc..

This actually makes the first stage of rough shaping go much faster. The plan is to take all pieces (this year about 60) through this phase and then remove the trim saw attachment (great saw by the way) and put back the three finishing wheels and polishing pad. And the plan was going perfectly until my sciatic nerve started to really act up and I couldn't stand up long enough to use the machine. So here I was with 60+ unfinished cabs and cold weather approaching. I needed a plan "B".

My wife Vickie (A.K.A. The Real Artist) knows how to use our Lot-O-Tumbler so we decided to finish them with it. The first problem was coming up with a big enough load and we did that by adding smaller, round, polished silicate stones. We sort of picked up where the wheels had left off by going with 600 grit and using more than usual to take into account the larger surface area of the smaller rocks. Normally I go one day on this grit but this time we went two. Vickie then moved on to 1000 grit silicone carbide pre polish and then to tin oxide polish. In both steps we added more grit and went two days. Finally, she did a burnishing cycle with Ivory Soap and again, we used more than normal.

The results were more than acceptable and there was virtually no breakage or damage. Here's how the total load looked.

And here's how it looked when all the round and small stones had been removed.

Now that I look at it, there were probably more than 60 pieces. But I ended up with some great cabochons,

and awesome guitar picks!

Would I go this route again in the future? Probably not simply because I love the process and I think the Cab King finishing wheels do a slightly better job. Also, you can't finish pieces that have crystal druzy pockets this way. But this process had it's advantages. First, it was faster and second it saved the wear on the finishing wheels but most importantly it gave us a way to finish the job with me out of commission!

The Rock Cutting Has Begun!

 Summer is here!

And it's finally warm enough for me to work in the shop with water. So the saw is humming and we've had some pretty awesome cuts so far. Here's a stone with a lot of copper oxide on the surface.

 And sure enough, the inside didn't disappoint.

You can even see a spot of native copper just to the left of the thumbnail. We also cut some very nice vein agate.

And some awesome plume /moss agate.

I just love the patterning and colour on this one so there is a really nice cabochon in its future.

Stay tuned with more cuts to come. And if you are in the neighbourhood, stop by and say hi and pick up your free tumbled rock. Take home a piece of "The Neck".

The Process

 I am not a jeweler per se. I am a lapidary. To me the most important element in any piece is the stone so settings are created to best show the stone and keep it safe. In this particular case, I was working with a stone exhibiting amazing patterning so the challenge was to create a setting that didn't cover it up. Step #1 was the design.

I positioned the stone on the paper and located the three shallow tabs where they would be clear of the best patterning and yet keep the stone secure in all directions. I cut the paper (roughly) and repositioned the stone using 2 sided tape. Then I folded the tab extensions up and drew the tab shapes and lengths. I used the square outline to cut a piece from my upcycled copper sheet and then cut the copper plate to fit the design. Then it was a matter of doing a LOT of filing until the plate matched the paper outline. At that point, I switched to sandpaper (400 grit -12,000 grit) to create burnished areas and other areas where I left the patina and character intact. Using a metal punch, a hole was made in the top extension to accommodate  the jump ring. At that point I carefully bent the 3 prongs until the stone was firmly held everywhere.

This agate is really amazing and I thought it deserved a special sliding bail. So I created this one and even added a little copper bead to "cinch" the neck.

The real problem was getting the colouring right on the picture. I can assure you it is much more dramatic in person (a photographer is another thing I am not!). Next step was to choose a complimentary premium leather cord and choose the length. I settled on a dark red to pick up the red in the stone and a length of 52 cm. (20 inches). The stone was hung on the leather and I finished it with a hand made decorative neck clasp.

I think the final piece is a real show stopper! Available on line or in the store and remember, I sell cabochons so if you would like to work with some beautiful rock, just let me know.

See you soon.

By the way, I have just passed 130K (non bot) page views on this blog and I would like to thank all of you for being part of my adventure.

One Door Shuts...And Another Opens

 Well, the scenery sure has changed. I now look out on several inches of snow with more to come today. Lapidary work requires a lot of water and right now that water is cold- VERY cold.

So now the scene shifts to fabrication and that takes place on my bench in my alloted space in "the real artist's" studio.

I have a problem that would be the envy of most- too much beautiful material! The real artist (AKA She with the agate eye) keeps finding me beautiful agates, jasper, amethyst, carnelian- you name it. I literally have enough good material to keep me going for decades but at 77 years old (and I mean OLD) I don't see decades in my future. So the first task has been to pare down the "stash" to a manageable amount.

As you can see this hasn't been an easy job. The small oval container just to the left of the blue bin contains well over 100 possible cabs to set. I'll probably get that down to about 20 that I'll start working on soon.

So if you ever want to buy some beautiful cabochons to make your own pieces, let me know.

What Happens To The Rocks I Cut?

 My last post showed some of the local rocks I recently cut. But what happens next?

To a great degree, that depends on what I discover inside. If the rock has cracks, it will probably shatter when I grind it but if it has interesting features, I can sometimes make beautiful specimen pieces. If the rock is solid and interesting, I will use it to make cabochons. This requires me to rough cut the shape I want on my Hi-Tech saw and then grind and polish it on my Cab King.

Several of the pieces shown last time were good enough to become cabochons and I thought you might like to see the transformation.

This piece of petrified wood became ...                                                            this.

And this became ...                                                                                   this.              

This one was so spectacular I had to make several pieces:

Fantastic end result. Couldn't pick a best side for the teardrop so I finished both!

It is an absolutely amazing experience watching the transformation from a piece of rough rock to a finished piece. So if your travels take you to Digby Neck, stop by and see my shop.

The Fun of Cutting Rocks

"Life', as Forest Gump so famously said, "is like a bunch of chocolates". He was referring to the unexpected surprises (good and bad I guess) that serve to make our lives interesting. 

Cutting rock is much the same. Surprises, both good and bad are revealed. True, if you know what you're doing, you have an inkling. But you never REALLY know.

The weather on Digby Neck has warmed up enough so that my water cooled lapidary machines can be fired up and recently I did a bit of cutting. Here are a few interesting pieces.

The first piece looked pretty good on the outside, with nice pink colouring.

But it was only when cut that the beautiful patterning was exposed, including the gorgeous pockets of fortification agate.

The next is a piece of petrified wood found on a beach. It had all the earmarks of petrified wood on the outside.

But when I cut it, the beautiful organic structure became evident and the great colouring also showed up.

Sometimes you get a complete surprise. On the outside it looked like a nice piece of agate.

But on the inside, there was an amazing array of colour and patterning. This will make a couple of amazing cabochons!

I'll be doing more cutting next week so stay tuned. And if you are in the area, come by and see our retail shop as well as my "Lap of Lapidary!

A Changing of the Seasons on The Neck

 Fall has arrived on Digby Neck.

It has been months since we faced that dreaded point when the days started getting shorter but at least we had the warmth. Alas, that too has started to wane. We now close the downstairs windows at night and wake up to darkness- a ritual that will be repeated for the next several months. Soon the dehumidifier will be shut off in the old stone walled basement, its hum replaced by that of the infrared heater to the joy of the two cats. 

Outside, the changing of the guard is occurring. The Cormorants are gone, soon to be joined by the Great Blue Herons and their spots on the pier and in the marsh have been filled by ducks and loons. Only the hardy gulls and crows will tough it out through the winter. The starlings are amassing on the telephone wires and we are seeing the odd jay along with the ominous presence of the harrier hawk.

The grass is growing much slower now and some plants are already dying while others, such as the Virginia Creeper, are going out in a splash of brilliant red glory.

Our routine has adapted. Afternoon tea or wine is now taken on the back deck where the sun's now shallow rays linger. It is amazing how important the warmth of the sun becomes as I get older. I feel the cold much more now. One good change is that the stars appear much earlier so on clear nights we are able to bundle up in our tilting deck chairs and search the now dark heavens for shooting stars and passing satellites.

Things are slowing down in The Lap of Lapidary as well. I'll do a few more loads in the tumbler and cut a bit more but the Cab King is now ready to be cleaned for its hibernation. I've recently completed a few pieces that I really like, however.

And I have enough "granite ice" to finally fill my display.

The pace has slowed dramatically, with fewer and fewer cars passing by and only the odd visitor to the shop.

So now the scene will shift indoors where I will take my place, Vickie willing, at my bench in her studio and work on completing some of the beautiful stones I fashioned this year and listing them on our website, The Seawall Emporium. I do cherish this time- feeding off the inspiration from "the real artist", listening to our favourite music and enjoying memories from time now long past. The cats seem to feel the same way as they seem content to spend hours curled up in balls on their beds on Vickie's table.

Soon the gale winds will be howling and the sea ice will be invading our bay, hypnotizing us with its wave driven movement. The cats will be seeking the warmth of the propane fireplace and walks on the beach will be a distant memory. Meanwhile, the oppressive, spirit crushing blanket of covid remains in place with no end in sight. 

However, hope springs eternal and for now, we will enjoy this brief window, this welcome calm before the storm that is fall on Digby Neck. 

Lapidary Is Like A Box Of Chocolates!

 Since we have had steady rain here for the last few days, I decided to tackle the mound of interesting rock that She With The Agate Eye had found and wanted cut. (Hey, what can I say- she buys me new blades!). Several of the pieces were sagenite and plume agate, not my favourite but she loves 'em. Most were stuff I'd seen before but then I got to these two very pleasant surprises. Normally, the plume agate doesn't polish very well because the plume areas are a little soft but this one...well, see for yourself!

Not only is the patterning outstanding, it polished to an absolute glass finish. And the best part is that just below the glass surface in the clear areas, are crystal druzy pockets that cause the stone to sparkle as it moves. It is about 4 cm. in height. This is absolutely one of the most beautiful cabs I've ever made and I have three more pieces to work with. It demands a very special setting.

This next piece was from a rounded end cut and all I had to do was smooth it out a bit and define a shape.

Again, the patterning and colour are fantastic and it has polished to a glass finish when I went to 50K diamond paste. Vickie, who among about a thousand other talents is a very accomplished abstract artist, has "borrowed" this piece for inspiration.

This is why I love cutting rock because as Forrest Gump says, " You never know WHAT you're gonna get!"