Making Viking Knit Chain

This time of the year, with all the sports on television, is the perfect time to make my Viking Knit Chain for next season. This particular piece is made from 24G half hard sterling silver wire.

First I weave it onto a metal dowel which is about as thick as my thumb.

 I try to create as few wire joins as possible so I use about 8 feet of wire at a time. For this piece the final length on the dowel was 21 cms.. When I take it off the dowel, it's wonky in spots and the chain isn't totally even.

But now I start to pass it through my hand made draw plate.

Some use metal plates but I prefer wood because there is less chance of scratching or damaging the wire. A soft wood like pine works well but the wire is strong enough to quickly damage and enlarge the holes. So I have settled on a nice piece of oak. I make two passes through each hole and for most of my bracelets and neck chains, I stop after the 7/32 inch hole.

As you can see the chain is now much longer (40 cms.) and has become much more uniform. The weaving has become "locked".

Now all that is left is to pull it against a wooden rolling pin to remove any kinks and make it nice and supple. This length will be used to make three nice women's' bracelets (one already spoken for). I'll make a few more in silver but will make more using 24G copper.

Creating this length will have taken me about 4-5 hours in total but most of that is spent in front of the TV watching sports so I don't begrudge the time.

Cheers!

Time to Create

 It is now the middle of May but it is still too cool to fire up the machines in the rock lab. So we've been using the time to create more pieces for the shop. I had this piece of copper flashing that came from a collapsed and abandoned house and was well over 100 years old and decided it was time to put it to use and give it a second life. It would be reincarnated as cuff bracelets.

The first step was to cut out blanks.

As you can see, they were pretty rough with some still having shingles and paint attached along with a lot of creases and dents. But this is what I treasure because it gives the final piece character. We decided to use two different techniques. The first was to clean up both sides and then pass the copper through our rolling mill with something (such as the plastic netting from an old onion bag) to create an impression.

The results were fantastic!

The second technique was to clean and polish the inside and then remove the verdigris, paint and some of the oxidation from the outer side. At that point we used several different "tools" to hammer from the inside to create raised points and creases on the rough side. Then, after a lot of filing and sanding, we had some amazing results.

Finally, we got a little fancy and combined the copper with some beautiful vintage glass beads.

These are just a a sampling of what we have in the shop and of course we had to add one made from a length of beautiful Viking Knit chain.

But that's not all we've done. In the next post I'll show you some beautiful earrings and one of the most spectacular pieces we have ever created. So stay tuned! And if your travels take you to Digby Neck- the most beautiful part of Nova Scotia (I may be biased) -stop by and say hi and see these pieces in person!