I am not a jeweler per se. I am a lapidary. To me the most important element in any piece is the stone so settings are created to best show the stone and keep it safe. In this particular case, I was working with a stone exhibiting amazing patterning so the challenge was to create a setting that didn't cover it up. Step #1 was the design.
I positioned the stone on the paper and located the three shallow tabs where they would be clear of the best patterning and yet keep the stone secure in all directions. I cut the paper (roughly) and repositioned the stone using 2 sided tape. Then I folded the tab extensions up and drew the tab shapes and lengths. I used the square outline to cut a piece from my upcycled copper sheet and then cut the copper plate to fit the design. Then it was a matter of doing a LOT of filing until the plate matched the paper outline. At that point, I switched to sandpaper (400 grit -12,000 grit) to create burnished areas and other areas where I left the patina and character intact. Using a metal punch, a hole was made in the top extension to accommodate the jump ring. At that point I carefully bent the 3 prongs until the stone was firmly held everywhere.
This agate is really amazing and I thought it deserved a special sliding bail. So I created this one and even added a little copper bead to "cinch" the neck.
The real problem was getting the colouring right on the picture. I can assure you it is much more dramatic in person (a photographer is another thing I am not!). Next step was to choose a complimentary premium leather cord and choose the length. I settled on a dark red to pick up the red in the stone and a length of 52 cm. (20 inches). The stone was hung on the leather and I finished it with a hand made decorative neck clasp.
I think the final piece is a real show stopper! Available on line or in the store and remember, I sell cabochons so if you would like to work with some beautiful rock, just let me know.
See you soon.
By the way, I have just passed 130K (non bot) page views on this blog and I would like to thank all of you for being part of my adventure.
This comment has been removed by a blog administrator.
ReplyDelete