Making Viking Knit Chain

This time of the year, with all the sports on television, is the perfect time to make my Viking Knit Chain for next season. This particular piece is made from 24G half hard sterling silver wire.

First I weave it onto a metal dowel which is about as thick as my thumb.

 I try to create as few wire joins as possible so I use about 8 feet of wire at a time. For this piece the final length on the dowel was 21 cms.. When I take it off the dowel, it's wonky in spots and the chain isn't totally even.

But now I start to pass it through my hand made draw plate.

Some use metal plates but I prefer wood because there is less chance of scratching or damaging the wire. A soft wood like pine works well but the wire is strong enough to quickly damage and enlarge the holes. So I have settled on a nice piece of oak. I make two passes through each hole and for most of my bracelets and neck chains, I stop after the 7/32 inch hole.

As you can see the chain is now much longer (40 cms.) and has become much more uniform. The weaving has become "locked".

Now all that is left is to pull it against a wooden rolling pin to remove any kinks and make it nice and supple. This length will be used to make three nice women's' bracelets (one already spoken for). I'll make a few more in silver but will make more using 24G copper.

Creating this length will have taken me about 4-5 hours in total but most of that is spent in front of the TV watching sports so I don't begrudge the time.

Cheers!